Volkswagen & Audi MED17 / ME17 ECU Advanced Clone Programming Recovery Service For No OBD Communication – Dead, Burnt, or Damaged ECU 2008-2014
Volkswagen & Audi MED17 / ME17 ECU Advanced Clone Programming Recovery Service For No OBD Communication – Dead, Burnt, or Damaged ECU 2008-2014
Volkswagen & Audi MED17 / ME17 ECU Advanced Cloning & Recovery Programming Service
No OBD Communication – Dead / Burnt / Physically Damaged ECU
This specialized cloning and recovery programming service is for Volkswagen and Audi vehicles equipped with Bosch MED17 and ME17 series ECUs where the original ECU has completely lost OBD communication (no diagnostic response) due to physical or electrical damage.
Common causes include burnt circuitry, water intrusion, power surges, failed internal components, shorted outputs, or other hardware-level failures. As long as the main microcontroller chip remains intact and readable, we can extract the necessary data directly from the original ECU using advanced bench-level and chip-level extraction techniques.
All critical data — VIN, immobilizer/security information, coding, adaptations, and software configuration — is cloned into a compatible replacement ECU you provide. The replacement unit will be fully programmed, plug-and-play, compatible with your original keys, and ready to start and run the vehicle normally.
⚠️ VERY IMPORTANT – READ BEFORE PURCHASING
This service is ONLY for hardware-damaged MED17 / ME17 ECUs with NO OBD communication.
🚫 This service is NOT suitable if the no-communication condition is caused by:
- Programming or coding failure
- Interrupted flash or software update
- Checksum or software corruption
- Security lockout
- Failed write operation or bricked ECU from flashing/tuning
In these scenarios, critical ECU or immobilizer data may be incomplete, encrypted, or inaccessible, making cloning unreliable or impossible.
ECUs sent in with software-related failures may be declined after inspection.
What “Programming” Means in This Service
Programming refers strictly to ECU data transfer and preparation, including VIN, immobilizer/security data, coding, adaptations, and configuration.
🚫 This is NOT a software repair, reflashing, tuning, or programming-recovery service.
Key Requirements
- Original ECU must have NO OBD communication due to physical/electrical damage ONLY
- Main processor chip must be intact and readable
- You must provide BOTH units:
- Faulty original MED17 / ME17 ECU
- Replacement donor ECU with matching hardware and part number
- Both ECUs will be returned after service
Supported ECU Types
Bosch MED17 / ME17 series, including but not limited to:
- ME17.5.2
- ME17.5.6
- MED17
- MED17.1
- MED17.5
- MED17.5.2
- MED17.5.5
- MED17.5.20
(Exact compatibility depends on part number and hardware version)
Supported Vehicles
Primarily petrol TSI / TFSI models using MED17 / ME17 ECUs (approx. 2008–2014):
Audi
- A3 (8P Facelift) – 2008–2014
- A4 (B8) – 2008–2014
- Q5 (8R) – 2008–2014
Volkswagen
- Golf (MK5 / MK6) – 2008–2014
- Jetta (MK5 / MK6) – 2008–2014
- Passat – 2008–2014
- CC – 2008–2014
- Tiguan – 2008–2014
- Beetle (A5) – 2008–2014
⚠️ Vehicle list is not exhaustive — ECU compatibility is determined by exact part number, not model alone.
Service Process
- Ship both your dead original ECU and compatible replacement ECU
- We perform advanced bench-level and chip-level data extraction
- All required vehicle data is cloned and programmed into the replacement ECU
- Both units are returned:
- Replacement ECU: plug-and-play, ready to install
- Original ECU: returned for your records
Turnaround Time
⏱ Typically 4–8 business days after receipt
(Includes inspection, extraction, and cloning)
Why Choose This Service?
- Solves true dead / burnt MED17 / ME17 ECUs where OBD cloning is impossible
- Retains full factory immobilizer and original key functionality
- No dealer programming required
- Cost-effective alternative to OEM ECU replacement
- Professional bench and chip-level data transfer
If the ECU Still Has OBD Communication
If your MED17 / ME17 ECU still communicates over OBD, this service is not required.
Please use our standard MED17 / ME17 cloning service instead.
Contact Us
Questions or unsure about compatibility?
Message us with your ECU part number and failure description before ordering, and we’ll confirm eligibility.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Volkswagen & Audi MED17 / ME17 ECU Advanced Clone Programming Recovery Service For No OBD Communication – Dead, Burnt, or Damaged ECU 2008-2014
