VW Audi Bosch MED9.1.1 ECU Clone Programming Service | FSI VR6 V8 V10

VW Audi Bosch MED9.1.1 ECU Clone Programming Service | FSI VR6 V8 V10

This is a mail-in ECU cloning service for supported Volkswagen and Audi vehicles equipped with the Bosch MED9.1.1 engine control module.

We transfer the necessary vehicle-specific data from your original ECU into a compatible replacement ECU that you provide. The replacement retains the required original vehicle and immobilizer information, allowing it to replace the original without normal replacement ECU immobilizer adaptation.

This service is commonly used for select 3.2L, 3.6L, 4.2L, and 5.2L FSI applications equipped with MED9.1.1.

When to Use This Service:

• Your original MED9.1.1 ECU is faulty but still communicates and can be read.
• You have a compatible used replacement ECU.
• You need the original immobilizer and vehicle-specific data transferred to the replacement.
• You want to retain the vehicle's normal immobilizer operation.

What This Service Does:

• Reads the necessary data from your original MED9.1.1 ECU.
• Transfers the required vehicle-specific and immobilizer data into your replacement ECU.
• Retains the original vehicle information and ECU configuration.
• Prepares the replacement ECU for installation back into the vehicle.

Supported ECU Type:

• Bosch MED9.1.1

Common Volkswagen Applications:

• Volkswagen Passat (B6) – select 3.2L / 3.6L FSI applications
• Volkswagen Touareg – select FSI applications

Common Audi Applications:

• Audi A6 / A6 Avant (C6) – select 4.2L FSI applications
• Audi A6 Allroad (C6) – select 4.2L FSI applications
• Audi A8 (D3) – select 4.2L FSI applications
• Audi Q7 – select FSI applications
• Audi S5 – select 4.2L FSI applications
• Audi S6 – select 5.2L V10 FSI applications
• Audi S8 – select 5.2L V10 FSI applications

Not every engine or model listed above uses MED9.1.1. Compatibility is determined by the ECU type, hardware, part number, and vehicle application.

Important Requirements:

• YOU MUST SEND BOTH ECUs — ORIGINAL AND REPLACEMENT.
• The original ECU must contain readable data for this cloning service.
• The replacement ECU must be compatible with the original.
• We recommend matching the original ECU part number whenever possible.

If you are unsure whether your replacement ECU is compatible, send us clear photos of both ECU labels before purchasing.

Important — Multi-ECU Applications:

Certain high-performance Audi applications may use more than one engine control module.

If your vehicle is equipped with multiple engine ECUs or you are unsure which module requires replacement, contact us with your vehicle information and ECU part numbers before purchasing.

Original ECU Severely Damaged?

If your original ECU has severe water damage, internal failure, physical damage, or no communication, contact us with your vehicle information and ECU part number before purchasing.

Data recovery may still be possible in certain cases depending on the condition of the original ECU.

Why Choose ECU Cloning?

• Transfers the original immobilizer and vehicle-specific information.
• Allows a compatible used ECU to replace the original.
• Retains the vehicle's normal immobilizer operation.
• Avoids normal replacement ECU immobilizer adaptation.
• Ideal for replacing a faulty MED9.1.1 ECU.

Don’t See Your Vehicle or Part Number?

Select Other / Part Number Not Listed or send us your vehicle information and ECU part number for verification. We’re happy to assist!