Volvo SPA CEM Clone Programming Service
Volvo SPA CEM Clone Programming Service
Volvo SPA CEM Clone Programming Service
Professional CEM (Central Electronic Module) Clone Programming Service for select Volvo vehicles built on the SPA platform.
If your original CEM has failed and you have a replacement donor CEM, we transfer the necessary vehicle-specific data from your original module to the donor CEM.
The donor CEM is clone programmed and verified using data from your original module, then returned to you prepared for installation.
How Our CEM Clone Programming Service Works
- Send us your original CEM and replacement donor CEM.
- We retrieve the necessary vehicle-specific data from your original module.
- We clone program the donor CEM using the original module's data.
- The replacement CEM is programmed and verified.
- Both modules are returned to you, with the donor CEM prepared for installation.
Important — Part Number Must Match
The original CEM and replacement donor CEM must have the exact same part number.
Do not assume that CEMs that look identical or are listed for the same Volvo model are interchangeable. CEM hardware and software can vary between vehicles and production versions.
If you are unsure whether your donor CEM is correct, contact us before purchasing and provide the complete part number and clear photos of both modules. We can verify the donor before you send it.
Supported Volvo SPA Models
Volvo XC90: 2016–2025
Volvo S90: 2017–2025
Volvo V90 / V90 Cross Country: 2017–2025
Volvo XC60: 2018–2025
Volvo S60: 2019–2025
Volvo V60 / V60 Cross Country: 2019–2025
Support depends on the exact CEM part number and vehicle configuration.
Common Part Numbers
Common CEM part numbers are available in the dropdown above. Select the part number that matches your original CEM when placing your order.
Important Information
- This is a CEM Clone Programming Service only.
- No replacement module is included.
- You must send us both your original CEM and replacement donor CEM.
- The original and donor CEM must have matching part numbers.
- Your original CEM must be capable of communicating with diagnostic equipment so the required vehicle data can be retrieved.
- This service does not repair the original CEM hardware.
- Depending on the CEM, the module may need to be opened for bench-level programming.
- The donor CEM is returned clone programmed and prepared for installation after successful programming.
- Hardware faults in the donor CEM are not repaired as part of this service.
Not Sure If Your CEM Is Supported?
Before purchasing, send us:
- A clear photo of the original CEM label
- The complete Volvo CEM part number
- A clear photo of the replacement donor CEM, if you already have one
We'll verify the module before you send it.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1
Common Part Numbers
Common Part Numbers
31665478
31665478AC
31682732
32209198
32142591
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Volvo SPA CEM Clone Programming Service
