Skip to product information
1 of 2

Mercedes-Benz W209 CLK SAM Fuse Box Hella Module Clone Programming Service

Mercedes-Benz W209 CLK SAM Fuse Box Hella Module Clone Programming Service

Regular price $349.99
Sale price $349.99
Shipping calculated at checkout.

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds
Note:

Mercedes-Benz W209 CLK-Class HELLA SAM / Fuse Box Clone Programming Service

This service is designed for Mercedes-Benz W209 CLK-Class vehicles equipped with the HELLA SAM (Signal Acquisition Module) / Fuse Box.

We will transfer the necessary vehicle-specific data from your original SAM / Fuse Box to a replacement unit that you provide, allowing the replacement module to be configured for your vehicle.

This service is commonly used when replacing a failed, damaged, or non-communicating SAM / Fuse Box. Once the cloning process is completed, the replacement module is programmed for installation in your vehicle.

Important:

  • The original and replacement SAM / Fuse Box must have matching part numbers for cloning to be successful.
  • Both the original and replacement modules must be shipped to us for the cloning process.
  • This service does not repair the original module. The vehicle-specific data is transferred from the original unit to the replacement.
  • Data can often be recovered even when the original SAM does not communicate with a diagnostic scanner.

Supported Vehicle:

  • Mercedes-Benz CLK-Class: W209
  • SAM Type: HELLA SAM / Fuse Box

Part number compatibility is critical. The original and replacement module should have the same part number for the cloning process.

Don't see your part number listed? Contact us with the part number from your original SAM / Fuse Box and the replacement unit, and we'll verify compatibility before you purchase.

 

© 2026 Velectronix. All Rights Reserved.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1

Common Part Numbers

A209 545 06 01 / 2095450601
A209 545 14 01 / 2095451401
A209 545 10 01 / 2095451001
A209 545 00 01 / 2095450001
A203 906 00 05 / 2039060005
A203 545 16 01 / 2035451601
A203 545 30 01 / 2035453001
A203 545 36 01 / 2035453601
A203 545 42 01 / 2035454201
A203 545 46 01 / 2035454601
A203 545 50 01 / 2035455001

General FAQ

See All

What is immo off or immobilizer delete, and will it work for my VW or Audi?

Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.

What is module cloning, and do part numbers need to match?

Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.

Do you have to open the module cases?

We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.

What are the shipping procedures and turn around times?

After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.

For detailed shipping times to and from your location, check out our shipping speed map.

What is the warranty?

We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.

Mercedes-Benz W203 C-Class SAM Fuse Box Hella Module Clone Programming Service

Mercedes-Benz W209 CLK SAM Fuse Box Hella Module Clone Programming Service

Regular price $349.99
Sale price $349.99