Maserati CFC2 CFC201 Transmission Control Module TCU Cloning Service DuoSelect Cambiocorsa
Maserati CFC2 CFC201 Transmission Control Module TCU Cloning Service DuoSelect Cambiocorsa
Maserati Magneti Marelli CFC2 (CFC201) Transmission Control Module (TCU) Cloning Service
This service provides complete cloning of Magneti Marelli CFC2 (CFC201) transmission control modules used with the Maserati DuoSelect / Cambiocorsa electrohydraulic manual transmission.
We transfer all programming, VIN information, coding, calibration data, adaptation values, and transmission parameters from your original CFC2 module into a compatible replacement unit, allowing it to function as a direct replacement in most applications.
Please send both your original TCU and a compatible replacement with the same CFC201 part number. Some modules require opening during the cloning process.
This listing is for CFC2 (CFC201) modules only.
It does NOT apply to the later CFC3 (CFC301) controller. Although the modules look very similar externally, they are different hardware and are not interchangeable. If your transmission control module is labeled CFC301, please see our Maserati CFC3 (CFC301) Transmission Control Module TCU Cloning Service.
Common Applications
Vehicles equipped with the Maserati DuoSelect / Cambiocorsa transmission may include:
Maserati
- Coupe Cambiocorsa
- Spyder Cambiocorsa
- GranSport
- Quattroporte M139 DuoSelect (early production)
Compatibility is determined by the Magneti Marelli CFC201 part number—not by vehicle year or model.
Service Includes
- Complete CFC2 cloning
- VIN transfer
- Coding transfer
- Adaptation transfer
- Calibration transfer
- Plug-and-play replacement
- Fast turnaround
- Professional bench programming
Important
Compatibility is determined by the Magneti Marelli CFC201 part number.
Please compare the part number on your original module with your replacement before shipping.
If you are unsure whether your transmission controller is a CFC2 (CFC201) or CFC3 (CFC301), send us a photo of the module label before ordering and we'll verify compatibility.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Maserati CFC2 CFC201 Transmission Control Module TCU Cloning Service DuoSelect Cambiocorsa
