Jeep Renegade BCM Clone Programming Service
Jeep Renegade BCM Clone Programming Service
Jeep Renegade BCM Clone Programming Service
Professional Body Control Module (BCM) cloning service for 2015–2023 Jeep Renegade (BU/BV).
If your original BCM has failed and you have a replacement donor BCM, we transfer the necessary vehicle-specific data from your original BCM into the replacement module you provide.
Once programming is complete, the replacement BCM is returned prepared for installation with the vehicle-specific data from your original module.
Important — Part Number Must Match
The original BCM and replacement donor BCM must have the exact same part number.
Do not purchase a donor simply because it is listed for the same year and model. Renegade BCMs can vary by vehicle configuration, and similar-looking modules may not be interchangeable.
Verify the complete part number on both modules before purchasing.
If you are unsure whether your donor is correct, send us clear photos of the labels on your original and replacement BCMs and we can verify them before you ship.
What You Send Us
You must send:
- Your original BCM
- A replacement BCM with the exact same part number
- A note containing your order number and vehicle information
The original BCM must be electronically readable so the required data can be retrieved.
What You Receive
Your replacement BCM will be programmed using the data from your original module and returned prepared for installation.
Your original BCM will also be returned.
Important Information
- Original and replacement BCM part numbers must match exactly.
- This is a BCM cloning/programming service only.
- No replacement BCM is included.
- A water-damaged or physically damaged original BCM may still be serviceable if the required electronic data can be retrieved.
- If the original BCM cannot be read or the required data cannot be recovered, we will contact you before proceeding.
- Some BCMs may need to be opened to complete the programming process.
- This service does not repair hardware faults in the replacement BCM.
Not Sure If Your BCM Is Supported?
Before purchasing, send us:
- A clear photo of your original BCM label
- The complete BCM part number
- A clear photo of your replacement BCM label, if you already have one
We'll verify the modules before you send them.
This is a programming service only. No replacement BCM is included.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1
Common Part Numbers
Common Part Numbers
2015–2018 — 68433660AA family
68433660AA, 68257702AA, 68312314AA, 68349765AA, 68358066AA, 68364769AA, 68370762AA, 68372073AA, 68372079AA
2015–2018 — 68433608AA family
68433608AA, 68257699AA, 68312372AA, 68349821AA, 68358065AA, 68364972AA, 68370758AA, 68372043AA, 68372045AA, 68436365AA
2015–2019 — 68433658AA family
68433658AA, 68264699AA, 68312319AA, 68358063AA, 68364971AA, 68370756AA, 68372071AA, 68372077AA, 68418010AA
2018–2019
68432817AA
2019–2023 — 68637656AA family
68637656AA, 68461995AA, 68470730AA, 68493535AA, 68509068AA, 68533163AA, 68550477AA, 68585976AA, 68614515AA
2021–2023
68625353AA, 68598526AA
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Jeep Renegade BCM Clone Programming Service
