Enable RPO T96 (Fog Lights) & AU0 (Keyless Entry) on 2004-07 Chevrolet Colorado / GMC Canyon — BCM Programming Service
Enable RPO T96 (Fog Lights) & AU0 (Keyless Entry) on 2004-07 Chevrolet Colorado / GMC Canyon — BCM Programming Service
Enhance your custom conversion project or upgrade build for a 2004-2007 Chevrolet Colorado or GMC Canyon by adding the factory option functionalities of RPO codes T96 and AU0. This service programs your vehicle’s Body Control Module (BCM) to support fog lights (T96) and remote keyless entry (AU0).
Supported Vehicles:
- Chevrolet Colorado (2004-2007)
- GMC Canyon (2004-2007)
Important Notes:
- Hardware required: This service is for BCM programming only. You must already have or install the required hardware for each feature:
- T96 Fog Lights: compatible fog light assemblies, wiring harness or switch provisions, properly grounded and fused circuit.
- AU0 Keyless Entry: key fobs, remote receiver module if not already present (may require different bcm), and door lock actuators or wiring support.
- The service does not include the hardware or installation of physical components — it enables the functionality only.
- You must send your original BCM or original & replacement BCM for programming.
- Opening or reprogramming the BCM may void any existing warranty on the unit.
- Ensure all related hardware is installed or confirmed compatible before programming. If it is not, wiring faults or non-functional features may occur.
Service Details:
- Fog Light Upgrade (T96): Activates the BCM branch that controls front fog lamps. Once the hardware is installed, they will function properly under the factory control system.
- Keyless Entry Upgrade (AU0): Programs the BCM to accept remote key fob signals, enabling door lock and unlock via remote. Panic or alarm functions may be available depending on hardware.
- You may choose one of the features T96 or AU0, or both together. We will tailor the programming accordingly.
How It Works:
- Send your original BCM securely packaged to our programming facility.
- Specify whether you want T96, AU0, or both enabled.
- We program and test the BCM, then return it ready to install.
- Install into your vehicle, connect the appropriate hardware, and verify operation.
Contact Us:
Reach out before sending your unit if you have any questions about compatibility, wiring, or hardware requirements. We will help ensure a smooth upgrade.
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Enable RPO T96 (Fog Lights) & AU0 (Keyless Entry) on 2004-07 Chevrolet Colorado / GMC Canyon — BCM Programming Service
