MINI Cooper MEVD17.2.3 DME ECU Cloning Programming Service | F54, F55, F56, F57, F60
MINI Cooper MEVD17.2.3 DME ECU Cloning Programming Service | F54, F55, F56, F57, F60
MINI Cooper MEVD17.2.3 DME ECU Cloning Programming Service | F54, F55, F56, F57, F60
Restore your MINI's engine control with our professional MEVD17.2.3 DME cloning and programming service. We transfer all critical data from your original DME to a replacement unit, allowing the replacement to function as a direct plug-and-play solution without dealer programming.
This service is designed for F-series MINI Cooper models equipped with 1.5L and 2.0L turbocharged engines using Bosch MEVD17.2.3 engine control units.
How It Works
- Ship us your original (faulty) DME and a replacement DME with the same part number.
- We transfer all necessary vehicle data, including VIN, immobilizer information, coding, and calibration-specific information.
- Your replacement DME is returned fully programmed and ready for installation.
Supported Vehicles
MINI Hardtop 2-Door (F56)
- Cooper 1.5L (2014–2019)
- Cooper S 2.0L (2014–2019)
- John Cooper Works 2.0L (2015–2019)
MINI Hardtop 4-Door (F55)
- Cooper 1.5L (2015–2019)
- Cooper S 2.0L (2015–2019)
MINI Convertible (F57)
- Cooper 1.5L (2016–2019)
- Cooper S 2.0L (2016–2019)
- John Cooper Works 2.0L (2016–2019)
MINI Clubman (F54)
- Cooper 1.5L (2016–2019)
- Cooper S 2.0L (2016–2019)
- John Cooper Works 2.0L (2016–2019)
MINI Countryman (F60)
- Cooper 1.5L (2017–2019)
- Cooper S 2.0L (2017–2019)
- John Cooper Works 2.0L (2017–2019)
Important Notes
- The original and replacement DMEs must have matching part numbers for cloning.
- Both DMEs must be shipped to us.
- The original DME must still communicate and be readable for this standard cloning service.
- If your original DME has no communication or cannot be read normally, please use our MEVD17.2.3 No Communication DME Clone & Data Recovery Service.
- This service is intended for replacement of failed or damaged DMEs.
- If you're unsure whether your DME is compatible, send us your Bosch and BMW part numbers before purchasing.
Why Choose VELECTRONIX?
- Professional bench cloning using OEM-level equipment.
- Plug-and-play replacement with no additional programming required.
- Fast turnaround.
- Save hundreds compared to dealership replacement costs.
- Trusted by repair shops, dealerships, and MINI owners nationwide.
Contact Us
Have questions about compatibility or your DME part number? Send us a message before ordering, and we'll be happy to verify whether your modules are compatible with this cloning service.
This product description is original content.
Unauthorized copying, scraping, or reproduction is prohibited.
Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1
Common Part Numbers
Common Part Numbers
12148674264
12148674262
12148674260
12148489653
12148691833
12148678859
12148678855
12148662851
12148662847
12148654466
12148654462
12148642708
12148642706
12148638788
12148638786
12148627208
12148627206
8674264
8662851
8662847
8654466
8654462
8642706
8638786
8627208
8627206
8489653
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
MINI Cooper MEVD17.2.3 DME ECU Cloning Programming Service | F54, F55, F56, F57, F60
