Land Rover Bosch MED17 ECU Cloning Programming Service | 2011–2021 Gas Models
Land Rover Bosch MED17 ECU Cloning Programming Service | 2011–2021 Gas Models
Land Rover Bosch MED17 ECU Cloning Programming Service | 2011–2021 Gas Models
We provide professional Bosch MED17 ECU cloning and immobilizer programming for Land Rover petrol (gasoline) vehicles equipped with Bosch MED17 engine control units. This service transfers all vehicle-specific data from your original ECU to a compatible donor ECU supplied by you, creating a 100% plug-and-play replacement with no dealer programming required.
Our cloning process transfers the immobilizer data, VIN, coding, adaptations, and other necessary information so your replacement ECU functions just like the original.
What Gets Cloned
- Immobilizer / security data
- VIN information
- Coding and configuration
- Adaptations
- Engine calibration data
- All necessary startup information
Important Requirements
To ensure a successful clone:
- Replacement must be a genuine Bosch MED17 ECU from the same Land Rover engine family.
- The Bosch part numbers on both ECUs must match.
- Your original ECU must still have working OBD communication.
- Donor ECU should be in good, tested condition.
- Petrol (gasoline) models only. This service does not support diesel ECUs.
If you're unsure whether your ECU is compatible, simply send us a clear photo of the label before shipping. We'll verify compatibility at no charge.
Supported Vehicles
This service supports many 2011–2021 Land Rover petrol models equipped with Bosch MED17 engine control units, including:
- 2011–2019 Range Rover Evoque
- 2015–2021 Discovery Sport
- 2017–2021 Range Rover Velar
- 2014–2021 Range Rover Sport
- 2013–2021 Range Rover
Compatibility is determined by the Bosch ECU part number—not the vehicle year alone. If your model is not listed, send us a photo of your ECU label and we'll gladly confirm whether your ECU is supported.
How the Service Works
- Ship us your original Bosch MED17 ECU along with a compatible donor ECU.
- We transfer all vehicle-specific data, including the immobilizer information.
- We return both ECUs with a fast turnaround.
- Install the cloned ECU and drive—no additional programming or dealer coding required.
Fast Turnaround
Most cloning services are completed and shipped back the next business day after your ECUs arrive.
Questions?
Have questions or aren't sure if your ECU is compatible? Send us a clear photo of the Bosch ECU label, and we'll verify compatibility before you ship your modules.
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
Land Rover Bosch MED17 ECU Cloning Programming Service | 2011–2021 Gas Models
