2003-2007 GM Body Control Module (BCM) Clone & Programming Service
2003-2007 GM Body Control Module (BCM) Clone & Programming Service
Professional BCM cloning and programming service for 2003-2007 GM trucks, SUVs, vans, and Hummer vehicles.
This service transfers the vehicle-specific data from your original Body Control Module (BCM) into a replacement BCM, allowing the replacement module to operate as if it were the original unit installed from the factory.
BCM cloning is commonly required when replacing a failed module that causes issues such as:
✔ No-start conditions
✔ Security or Passlock-related problems
✔ Power lock and remote entry malfunctions
✔ Interior lighting issues
✔ Communication faults
✔ Accessory operation problems
✔ BCM water damage or internal failure
By transferring the original BCM data into the replacement unit, vehicle configuration information is retained and compatibility issues are minimized.
Supported Vehicles
Chevrolet
- Avalanche (2002-2006)
- Silverado (2003-2006)
- Silverado (2007 Classic)
- Suburban (2003-2006)
- Tahoe (2003-2006)
- Express 1500 / 2500 / 3500 (2004-2006)
GMC
- Sierra (2003-2006)
- Sierra (2007 Classic)
- Yukon (2003-2006)
- Yukon XL (2003-2006)
- Savana 1500 / 2500 / 3500 (2004-2006)
Cadillac
- Escalade (2003-2006)
- Escalade ESV (2003-2006)
- Escalade EXT (2003-2006)
Hummer
- H2 (2003-2007)
Compatible BCM Part Numbers
Standard Cab & Extended Cab Applications
15116065
15136224
15167329
15136876
15194169
15198115
15747545
10367689
SUV & Crew Cab Applications
10367690
15064149
15116066
15136225
15136877
15137393
15137394
15137395
15194170
15198116
How the Service Works
- Purchase this service.
- Ship us your original BCM and replacement BCM.
- We transfer the vehicle data from the original module into the replacement unit.
- Your programmed BCM is returned ready for installation.
Important Information
Both the original BCM and replacement BCM must be supplied.
The original BCM must contain readable data for cloning.
These BCMs must be opened during the cloning process, which may void any existing warranty on the replacement module
If you are unsure about compatibility, please contact us for assistance.
General FAQ
See All
What is immo off or immobilizer delete, and will it work for my VW or Audi?
Immobilizer delete (immo off) bypasses the immobilizer in the engine control unit (ECU) of VW and Audi vehicles. It’s used when the vehicle starts but immediately shuts down due to a fault in the immobilizer system, often with fault codes P1570 or P0513. Immo off services will not work if the vehicle does not start at all; it must start and then be shut down due to the immobilizer.
What is module cloning, and do part numbers need to match?
Module cloning involves copying all the data from one module to another, allowing the replacement to function just like the original. While it's generally recommended to match part numbers for compatibility, the necessity can vary by module. Some require exact matches, while others are more flexible and allow cloning between different part numbers. Each product listing on our website specifies the part number requirements. If you're unsure, feel free to reach out for guidance.
Do you have to open the module cases?
We only open module cases when absolutely necessary. For services that don’t require opening, we won’t open the module. However, depending on how badly damaged your original ECU is, sometimes opening the module is the only way to retrieve data. Additionally, some services don’t have a plug-in method at all and require direct access to the board, including soldering or chip replacement. The need to open modules is not specific to us but is sometimes essential depending on the condition of the ECU.
What are the shipping procedures and turn around times?
After purchasing, you will receive an email with shipping instructions. You are responsible for shipping your modules to us, and we will cover the return shipping. You can use any shipping service that is convenient for you. We typically use UPS Ground (3-5 days) for return shipping, but in some cases, we may use USPS or FedEx. Once we receive your package (shipping times depend on how quickly you ship it and the service used), we typically ship it back the next business day. Some services may require a 2-day handling time, depending on the complexity.
For detailed shipping times to and from your location, check out our shipping speed map.
What is the warranty?
We offer a 90-day warranty on programming only. This covers the accuracy of the programming performed, but does not extend to the module hardware itself.
2003-2007 GM Body Control Module (BCM) Clone & Programming Service
